Genz Benz SHENANDOAH Pro Akustik Verstärker

Genz Benz SHENANDOAH Akustik Combo - Shen Pro 
200 watt stereo, Röhren-Preamp, 1x12" Neodymium Speaker, + Horn 2 mischbare Vorstufen Röhre/Fet,  2 Kanäle, digitale Effekte, 23 kg   

Dieser Akustikverstärker ist mit einer Transistorvorstufe und einer zusätzlichen Röhrenvorstufe ausgestattet. Die Röhre verleiht dem natürlichen Klangbild der Gitarre
zusätzliche Wärme und angenehme Kompression, ohne jedoch eine Verzerrung bei härterem Anschlag auszulösen. Um ein sattes und volles Ansprechverhalten und
eine einzigartige tonale Charakteristik zu erhalten, wurde dieser innovative Amp mit einem höchst effi zienten und sehr leichten 300 Watt Neodynium 12“ Lautsprecher ausgestattet.
Semiparametrische Mitten und ein Effektprozessor mit 15 Programmen in Studioqualität sorgen für höchte Flexibilität. Mit 200 Watt RMS Leistung erzeugt dieser Amp einen enormen Headroom für einen satten, klaren Ton und bietet somit die Basis für High Level Output. Das Gehäuse aus gesperrter Birke ist trotz des geringen Gewichts von 23 kg sehr stabil. Mittels eines Griffes an der Unterseite des Combos kann dieser etwas gekippt werden - für Monitoring-Anwendung ideal.

Features Genz Benz Shen 60:
- Powerful 200 Watt Output for Increased Headroom
- Select or Blend 12AX7 Tube Pre-amp and FET Pre-amp
- Two Channels w/3 Band Active EQ with Sweepable Mid Frequency
- XLR and 1⁄4" Inputs (Mix Together)
- All Input Signals Mix Together
- Signal Input Phase Switch for Each Channel
- Dual DSP Effects Processors with 15 programs — One for Each Channel
- Effects Loop
- Neodymium 300 watt 12" Loudspeaker
- Compression Bullet Tweeter with Level Control
- Internal Fan Cooling with Fan Switch
- Compact, Light-weight, Powerful Design
- Baltic Birch Plywood Construction
- Bottom-mounted Tilt-back Handle
- Comfortable Leather Strap Handle
- Capable of Driving Up to Two 8 Ohm Extension Cabinets
- Auxillary Input w/RCA & 1⁄4" Jacks
- Front Panel Auxillary Input Control

We have taken the initiative in the design of the Shenandoah™ Acoustic Pro to include a 12AX7 tube to the pre-amp which enhances the acoustic guitar's timbre with the tonal characteristics, warmth and compression of the TUBE but without distortion when driven hard. This innovation is combined with a highly efficient and lightweight 300 watt Neodymium 12" loudspeaker, for itís articulate full-bodied response and unique tonal characteristics.

The power amp platform is a stout 200 watts RMS that provides tremendous headroom for full-bodied, clean tone and the foundation for the high level output of this professional acoustic tool. The cabinet is strong, yet lightweight and constructed from Baltic birch plywood. The cabinet is rear ported and utilizes a bottom-mounted tilt back handle that will angle the amp up towardsthe performer. Along with the tube pre-amp feature, the SHEN-PRO offers two identical channels, each with an XLR and 1/4" input, 3 band EQ with sweepable midrange and a separate Alesis™ digital effects processor for each channel. Each DSP offers 15 studio quality programs for complete flexibility.

BLENDABLE TUBE & FET PRE-AMPS
- Select or Blend a 12AX7 Tube or FET Pre-amp
- Tube Pre-amp Design Produces Warm, Round, Full Bodied Character
- FET Pre-amp Produces Smooth, Articulate, Prestine Response
- The Input Phase Feature Interacts with the Tonal Response of Either Pre-amp
- Drive the Input Gain Harder When Using the Tube Circuit for More Tube Compression

GNX 12300 NEODYMIUM LOUDSPEAKERS
Our custom designed 12" Neodymium cast frame Loudspeaker is rated at 300 watts RMS and utilizes a 2 1/2" aluminum edge-wound high temperature voice coil. The 7 oz. Neodymium magnet assembly is encased in a large heat sink structure for exceptional cooling. The combination of this high efficiency motor structure, along with the unique clarity and response characterisics of this speaker, make it an excellent transducer for Acoustic guitar amplification.